Back to publication list

Sen'i Gakkaishi 48(9), 493-500(1992).

CHARACTERIZATION OF AIR-LEAK SMOOTHNESS OF PAPER BY ANALYSIS OF CORRELATION

相関法による紙の空気漏洩式平滑度の評価

Toshiharu Enomae, Sen'ichiro Ishida*, Fumihiko Onabe, and Makoto Usuda
Faculty of Agriculture, The University of Tokyo
Bunkyo-ku, Tokyo, 113, Japan
*Present address: Tokushu Paper Company MFG. Co., Ltd, Sunto-gun, Shizuoka

江前敏晴、石田銑一郎*、尾鍋史彦、臼田誠人
東京大学農学部
*現在の所属:特種製紙、静岡県駿東郡

ABSTRACT

Smoothness of paper is customarily measured by an air-leak smoothness tester. An Oken type instrument was used in this work. The purpose of this study was to examine what roughness size level the air-leak smoothness expresses if roughness includes microroughness to macroroughness variously. A profile curve measured by a stylus instrument was separated into waves with various wavelengths by Fourier-transform. Amplitude of each waves was correlated with the Oken type smoothness. From a profile curve measured by a stylus instrument, the centerline average was calculated after removing waviness components which correspond to waves with wavelength conventionally longer than 800 μm. When this cut-off value indicating a threshold level was varied, the centerline average was correlated with the Oken type smoothness. Such correlation analyses connected with spectral analyses were applied for various kinds of handsheet. They include calendered sheets and those made from beaten pulp. As a result, the correlation between the Oken type smoothness and the centerline average with the cut-off value showed a smoother change and a more distinctive peak. Moreover, the roughness level Oken type smoothness expresses was found to be waves with wavelength equivalent to or less than about 273 um for handsheets.

紙の平滑度は通常空気漏洩式平滑度計で測定される。本研究の測定ではその中で王研式平滑度計を用いた。本研究の目的は表面粗さがミクロな粗さ領域からマクロな粗さ領域まで分布しているという概念から考えると、空気漏洩式平滑度計はどの大きさの粗さレベルを表現しているのかを調べることである。触針式表面形状測定機によって測定される断面曲線をフーリエ変換によっていろいろな波長の波に分解した。そしてそれぞれの波の振幅と王研式平滑度との相関を調べた。また通常800μm以上の長さの波長を持つ波の成分を除いてから中心線平均粗さを計算するが、このカットオフ値を変化させたときの中心線平均粗さと王研式平滑度王研式平滑度との相関を調べた。このようなスペクトル的な解析をカレンダーがけレベルや叩解度レベルの異なる手抄き紙について行った。その結果、振幅法と中心線平均粗さ法では後者の方が滑らかな変化を示し、はっきりしたピークがあった。さらに王研式平滑度の表す粗さ領域は手抄き紙の場合、およそ273μm程度の波長領域であることがわかった。